1mW FM Transmitter Radio Stereo Station Wireless Broadcast Antenna Home Church

Description

[
1mW FM Transmitter Radio Stereo Station Wireless Broadcast Antenna Home Church
]
Desrciption:
*
Uses: only for home
*
The machine is small in size, easy to carry, and the sound quality can reach the professional FM station effect
*
Tested, 100% function
*
Condition:
100% brand new and high quality.
*
Product Name:
1mW FM transmitter
*
Color:
Black
*
Power Supply Voltage: DC9V-DC13.8V (12V recommended)
*
Working Current: <50MA, 100MA
*
Frequency Range: 87 ~ 109Mhz
*
Working Bandwidth: 20MHz
*
Modulation Method: Frequency modulation (FM)]
*
MAX Frequency Offset: ± 75KHz
*
Transmitting power:
1mW
*
RF output impedance: 50 Ohm
*
Frequency Step value: 0.1MHz
*
Separation: 40dB
*
Distortion: 0.1%
*
Input Level: -13dBV
*
Connector Shield Wire: 3.5mm
*
Size:
Approx. 105mm
x 65mm
x 27mm/4.13"
x 2.55"
x 1.06"
*
Distance: 10-20 meters, low power
Note:We also have
70-90MHZ 0-120MHZ
Frequency
customized,if you need,please contact us!!!
Basic Operation:
1. Connect the antenna and power supply first.
2. Short press the UP and DOWN keys, the transmitter will increase or decrease the operating frequency in 0.1MHz steps.
3. Press and hold the UP and DOWN keys, the transmitter will enter the fast jump state until the button is released.
4. The audio input signal is connected to the "AUDIO" interface, and the front end string magnetic ring is input to isolate the interference.
Why is there a buzzing sound and how to deal with it?
Answer:
1. The FM transmitter is not a general electronic product. It has strong radiation and needs other supporting equipment to work. According to experience, the problem you encounter is that the input source is interfered by the antenna signal. The stronger the signal, the more serious it is. You can move the antenna away from MP3, IPOD and other input sources, or change the input source with low interference.
2. The input sound source level should not be too high (for example, the desktop DVD cannot meet the sound source level requirements), even if the volume is reduced, there may be a lot of noise. MP3 or laptop is a good choice for audio source.
3. After unplugging the audio input plug and the antenna, if there is still noise, it must be caused by the power supply. You can use the TDK degaussing ring to eliminate the noise; the pursuit of sound quality is very high, you can replace the higher quality power supply or battery.
Item Including:
1 x
1mW FM Transmitter
1 x
12V Power Supply
1 x
Short Antenna
Note:
* Please allow slight deviation of measurement due to manual measurement.
*
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1.We can only receive paypal payment
2.If you not have paypal account,please check www.paypal.com
3.
After the payment cleared, we will send it out as soon as possible to you
4.Please pay the item after you buy it in four days,if over that days,base on ebay rules,we can open unpaid case for you automatic,thank you for your understanding
1.
Shipping Costs are Calculated based on your location, weight of the package and the shipping service you selected.
2.There is no combine shipping discount,
the final cost of shipping is based on the total weight of all the items.
3.
Country specific Import Duties, Taxes, and Charges
are not included
in the Item price or Shipping cost.  These charges are the Buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
4.We have items in stock at USA warehouse and China warehouse,please attention each listing item location.
USA warehouse only ship to United States,about 2-6 business days by USPS mail.
China warehose can ship worldwide and by China Post mail:
United States,United Kingdom about 2-3 weeks
Canada,Australia,Europe about 3-4 weeks
Other country about 3-5 weeks
If you need to express transport, please contact us.
We provide DHL transport,but you need extra pay ship fee.
1.Refund or replacement request is available only the requests within 1 week after parcel received & returning the item as the same condition as received.
2.Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.
3.Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable.
4.If the item is found non-defective, the item will be sent back to the buyer at buyer's expense. Items returned without RMA number will be refused and returned to the sender. Buyer is responsible for All Return Postage and Shipping Charges. Buyer is responsible for additional shipping costs for items that are returned refused and/or undeliverable. We do not accept any returns without an authorization number on the box or label it is being returned in.
1.We are professional factory to make kinds of motorcycle CNC accessory,such as kinds of modified brake clutch levers,rearsets,foot pegs,steering dampers,kickstand sidestand,handlebar clamp,swingarm spool bolts and so on.
2.We can offer wholesale and retail,customer order is also can do.
3.We can guantee the items quality and give reasonable price to you.
Desrciption:
*
Uses: only for home
*
The machine is small in size, easy to carry, and the sound quality can reach the professional FM station effect
*
Tested, 100% function
*
Condition:
100% brand new and high quality.
*
Product Name:
1mW FM transmitter
*
Color:
Black
*
Power Supply Voltage: DC9V-DC13.8V (12V recommended)
*
Working Current: <50MA, 100MA
*
Frequency Range: 87 ~ 109Mhz
*
Working Bandwidth: 20MHz
*
Modulation Method: Frequency modulation (FM)]
*
MAX Frequency Offset: ± 75KHz
*
Transmitting power:
1mW
*
RF output impedance: 50 Ohm
*
Frequency Step value: 0.1MHz
*
Separation: 40dB
*
Distortion: 0.1%
*
Input Level: -13dBV
*
Connector Shield Wire: 3.5mm
*
Size:
Approx. 105mm
x 65mm
x 27mm/4.13"
x 2.55"
x 1.06"
*
Distance: 10-20 meters, low power
Note:We also have
70-90MHZ 0-120MHZ
Frequency
customized,if you need,please contact us!!!
Basic Operation:
1. Connect the antenna and power supply first.
2. Short press the UP and DOWN keys, the transmitter will increase or decrease the operating frequency in 0.1MHz steps.
3. Press and hold the UP and DOWN keys, the transmitter will enter the fast jump state until the button is released.
4. The audio input signal is connected to the "AUDIO" interface, and the front end string magnetic ring is input to isolate the interference.
Why is there a buzzing sound and how to deal with it?
Answer:
1. The FM transmitter is not a general electronic product. It has strong radiation and needs other supporting equipment to work. According to experience, the problem you encounter is that the input source is interfered by the antenna signal. The stronger the signal, the more serious it is. You can move the antenna away from MP3, IPOD and other input sources, or change the input source with low interference.
2. The input sound source level should not be too high (for example, the desktop DVD cannot meet the sound source level requirements), even if the volume is reduced, there may be a lot of noise. MP3 or laptop is a good choice for audio source.
3. After unplugging the audio input plug and the antenna, if there is still noise, it must be caused by the power supply. You can use the TDK degaussing ring to eliminate the noise; the pursuit of sound quality is very high, you can replace the higher quality power supply or battery.
Item Including:
1 x
1mW FM Transmitter
1 x
12V Power Supply
1 x
Short Antenna
Note:
* Please allow slight deviation of measurement due to manual measurement.
*
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
PAYMENT
1.We can only receive paypal payment
2.If you not have paypal account,please check www.paypal.com
3.
After the payment cleared, we will send it out as soon as possible to you
4.Please pay the item after you buy it in four days,if over that days,base on ebay rules,we can open unpaid case for you automatic,thank you for your understanding
SHIPPING
1.
Shipping Costs are Calculated based on your location, weight of the package and the shipping service you selected.
2.There is no combine shipping discount,
the final cost of shipping is based on the total weight of all the items.
3.
Country specific Import Duties, Taxes, and Charges
are not included
in the Item price or Shipping cost.  These charges are the Buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
4.We have items in stock at USA warehouse and China warehouse,please attention each listing item location.
USA warehouse only ship to United States,about 2-6 business days by USPS mail.
China warehose can ship worldwide and by China Post mail:
United States,United Kingdom about 2-3 weeks
Canada,Australia,Europe about 3-4 weeks
Other country about 3-5 weeks
If you need to express transport, please contact us.
We provide DHL transport,but you need extra pay ship fee.
Terms of Sale
1.Refund or replacement request is available only the requests within 1 week after parcel received & returning the item as the same condition as received.
2.Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.
3.Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable.
4.If the item is found non-defective, the item will be sent back to the buyer at buyer's expense. Items returned without RMA number will be refused and returned to the sender. Buyer is responsible for All Return Postage and Shipping Charges. Buyer is responsible for additional shipping costs for items that are returned refused and/or undeliverable. We do not accept any returns without an authorization number on the box or label it is being returned in.
ABOUT US
1.We are professional factory to make kinds of motorcycle CNC accessory,such as kinds of modified brake clutch levers,rearsets,foot pegs,steering dampers,kickstand sidestand,handlebar clamp,swingarm spool bolts and so on.
2.We can offer wholesale and retail,customer order is also can do.
3.We can guantee the items quality and give reasonable price to you.